Uplink is what goes from the cell phone to the cell tower and downlink is what comes from the cell tower to the cell phone. On a SureCall booster like the Force5 2.0, there are dip-switches that control the uplink and the downlink separately.
#Att signal booster how to
How To Manually Attenuate a Signal Booster SureCall has signal boosters for large building applications that offer the customer either AGC equipped signal booster or one that gives them added control using DIP-switches. Manual attenuation can also come from other sources, which we’ll get into later in the post. Manual attenuation can be created using dip-switches, which can simply be switched on or off to control the attenuation of each band supported within the booster. Signal boosters with AGC work extremely well, but do not allow the customer to manually attenuate the system, which some customers prefer. Many boosters have automatic gain control, or AGC, which uses software to automatically adjust the amount of power the system adds to the existing signal. It’s also a basic standard in signal booster set up to prevent overpowering and to manage antenna separation. Too little power could deliver a smaller coverage area than could otherwise be achieved.Īttenuation can also be useful for some businesses or residences who want to decrease the amount of signal that overflows beyond the walls of their building. Too much power could cause oscillation between the indoor and outdoor antennas. This is called attenuation.Īdjusting attenuation is like fine-tuning the cell signal booster to add or remove power from the booster as a means of maximizing the coverage area. What is Attenuation?īased on the cellular environment or the size of the building, the best performance from the signal booster may be achieved by lessening the power the booster is putting-out.
More power is not always better, at least not with signal boosters.
0 kommentar(er)
